GUNK Foamy Engine Cleaner

SKU: FEB1C Category:


The quick-expanding, easy-to-rinse foam is specially designed to safely remove build up from engines with plastic covers

  • Quickly removes dirt, dust and road grime
  • Foam clings to vertical surfaces
  • Designed for engines with plastic covers
  • Rinses easily with water
  • Not for sale in California

Learn More

GUNK Engine Cleaner – Foamy

Clean engines run cooler, look better and last longer

Whether you’re about to work under the hood, prep your ride for resell or are just overdue for a custom detail, deal muck and grime it’s final blow with GUNK’s Engine Cleaner Foamy. It’s foaming action quickly removes dirt, dust and road grime Specifically designed for engines with plastic covers, Engine Cleaner Foamy is safe on plastics, under-hood rubber and paint. GUNK, makers of the toughest cleaners on the planet for over 60 years, is one of the #1 brands in engine degreasing.

Spray on, hose off, that’s it

Save the elbow grease for other jobs. Just spray GUNK’s Engine Brite Foamy on your engine, wait 10-15 minutes, hose it down and you’re done.

Works on multiple vehicle types

Use GUNK’s Engine Cleaner Foamy on cars, trucks, power mowers, marine, RV’s, ATV’s, bikes, farm equipment, tractors and more!

Dirty Engine

Engines accumulate road grime, dirt, dust, & oil. This can cause your engine to run hotter and less efficient.

Apply GUNK Foamy Engine Cleaner

Powerful foam clings to vertical surfaces to lift dirt, grime, grease and oil. Allow Engine Cleaner Foamy to soak for 10-15 minutes.

Hose it Off

Hose off the engine degreaser while taking care around any sensitive components. When washed clean, start your engine and let idle for 15 minutes to assure complete drying.

Apply GUNK Engine Shine (CEB1)

Protect your engine from future dirt & grease build up, while leaving an attractive shine with our GUNK Engine Protector & Shine product.


Download SDS




This product worked great on our CRV that had 150K miles on it. Just cover your engine bay liberally with the foam, then scrub the really dirty places and wash it all off 10 mins later.

Impress when the hood is raised...

Do you want your engine clean? Do you want to impress people when you pop the hood? I've tried every brand of engine cleaner that is readily available and only this "Foamy" version does the job for me. One can of this foamy cleaner is not that expensive. Use the entire can to completely cover your engine with the foam. Give it time to loosen the crud. You can rinse with a slow stream of water or you can use a pressure washer. Take care to cover anything that is sensitive to water or your car will not start......or it will and it will run like crap. Follow up by spraying a complete can of foaming tire shine/cleaner over your newly cleaned engine. Your engine will look as good or better than the day it rolled off the lot. You're welcome.

Easy to use and works extremely well!

I needed to clean my (shamefully neglected) engine on my 2007 Ford Focus. It was quite dirty and really needed a good wash. I am hesitant to use a pressure washer in the engine bay as it could push water into unwanted places. After a bit of research, I came across this and chose the Foamy version as it was the least 'powerful' of the brand. As the 'Foamy' title implies, this stuff comes out kind of like shaving cream on steroids when sprayed. I really liked the foaming action and it was easy to see what areas I had hit and what I may have missed. After a minute or so, the foam will dissipate and the cleaner will cling onto the sprayed areas. Rinsing this off was very easy and little water pressure was needed to rinse the cleaner off. After a thorough rinsing with water and then air pressure to get the water out of all the crevices, I am extremely happy with the result. This worked really well at getting the road grime and grease off of all the engine parts that were sprayed. Even the shiny metal bits were sparkling once again. There is enough product in the can to do two average size engines with moderate coverage. If you are doing heavy coverage, you will likely not get two full engines worth of cleaning. Overall I am very happy with the result and can say that I recommend this product to anyone who is going to clean their engine!